|
|
|
|
|
|
| |
|
|
|
The BVM series pumps are ideal for industrial, municipal, commercial, and agricultural applications where pressure needs boosting and available space is an issue. Flows to 110 GPM, Heads to 800 feet. |
|
_th.jpg)
|
|
The MGP Series utilizes the patented SignaSeal floating impeller design which minimizes thrust loads allowing for continuous operation without damage to pump, mechanical seal or pump hydraulic components. Applications include commercial, or agricultural pressure washing, spraying systems, and reverse osmosis. |
|
|
|
Hydraulic Drive End Suction Pumps are heavy duty pumps for special applications where driving a pump with an electric motor or internal combustion engine is not practical. Hydraulic motor drives are ideal for many industrial & OEM applications where drive options, environmental conditions and space considerations are an issue. |
|
|
|
Hydraulic Drive Self-Prime Pumps are heavy duty pumps for special applications where driving a pump with an electric motor or internal combustion engine is not practical. Hydraulic motor drives are ideal for many industrial & OEM applications where drive options and space are limited. |
|
|
|
Type B End Suction pumps are ideal for most applications requiring high performance, easy maintenance and moderate initial cost, Type B pumps are found in many OEM, Industrial, Commercial and Agricultural markets. Flows to 5000 GPM. Heads to 635 feet. |
|
|
|
The SSCX series stainless steel pumps are designed for applications where corrosion resistant dependability is essential. Flows to 100 GPM, Heads to 135 feet. |
|
|
|
CP/CB series and other Berkeley pumps are capable of working temperatures to 140 degrees fahrenheit. Flows to 130 GPM, Heads to 140 feet. |
|
|
|
The CC Series pumps are ideal for use in water systems, light industrial, commercial, and irrigation applications. Flows to 250 GPM, Heads to 100 feet. |
|
|
|
Type B High Pressure pumps service a wide range of pumping applications in the industrial, municipal, commercial, and agricultural markets. Flows to 165 GPM, Heads to 660 feet. |
|
|
|
The LTH/LTM Series applications include lawn sprinkling, agricultural irrigation, industrial & marine dewatering. |
|
|
|
SAE End Suction Pumps are suitable for any application requiring the convenience of an internal combustion engine as a power source. End Suction pumps must be flooded prior to operation. |
|
|
|
SAE Self-Prime Pumps are suitable for any application requiring the convenience of an internal combustion engine as a power source. |
|
|
|
Frame Mount End Suction Pumps are suitable for any application where the use of an independent power source (motor, engine, etc.) can be coupled to the pump shaft using a flexible coupling. End Suction pumps must be 'flooded' prior to operation. |
|
|
|
Frame Mount Self-Prime Pumps are suitable for any application requiring the use of an independent power source (motor, engine, etc.) can be coupled to the pump shaft using a flexible coupling. |
|
|
|
PENTEKŪ offers a full range of 1/2 - 15 HP models that are interchangeable with existing motor controls for Capacitor Start/Induction Run (CSIR) and Capacitor Start/Capacitor Run (CSCR) applications. |
|
|
|
ClearJet models provide excellent performance with good pressure for wells to 25' deep. Self-priming after the priming chamber has been filled with water. |
|
|
|
6" Hitachi submersible motors are fully featured for many years of dependable operation. |
|
|
|
PN Series Shallow Well Jet Pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25' or less. |
|
|
|
Precision-engineered, high-quality, rugged MGS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water. |
|
|
|
Precision-engineered, quality built, and rugged 70 GPM Series submersibles may be used in wells 4" or larger. |
|
|
|
The ECC5 Series self-priming centrifugal pump is a rugged cast iron pump capable of priming up to 20' vertically and will handle solids up to 0.225" diameter. |
|
|
|
Feature laser-welded 304L stainless steel construction, higher thrust capacities and higher efficiencies. |
|
|
|
Full range of 1/3 - 15 HP single-phase protectors were a 4" submersible, 2- and 3-wire motor is used and for aboveground pressure-boost applications. |
|
|
|
The Shertech stainless steel open impeller centrifugal pump is designed for continuous circulation and transfer of aggressive liquids. |
|
|
|
BERKELEY B3ZRM Heavy Duty Pumps are dimensionally interchangeable with the standard design. Incorporates ten of the industry's best product features. Provides the best operating and maintenance benefits available. |
|
|
|
Pre-Specified and Packaged Constant Pressure Systems for Residential Well Water |
